Tesk
language
中国
韩国
韩国
韩国
韩国
韩国
English/Language
language
中国
韩国
韩国
韩国
韩国
韩国

搜索
Search
img
NEWS NEWS

Structural principle of micro-bubble generator

  • Categories:About us
  • Author:
  • Origin:
  • Time of issue:2023-03-09 16:26
  • Views:

(Summary description)The structural principle of the micro-bubble generator must not be well understood by many people, so let’s briefly introduce it today.

Structural principle of micro-bubble generator

(Summary description)The structural principle of the micro-bubble generator must not be well understood by many people, so let’s briefly introduce it today.

  • Categories:About us
  • Author:
  • Origin:
  • Time of issue:2023-03-09 16:26
  • Views:
Information

The structural principle of the micro-bubble generator must not be well understood by many people, so let’s briefly introduce it today.

micro-bubble generator
1. Outlet pipe interface
Connect the water outlet connector with a hose or a hard pipe so that the dissolved air water from the atomizer can be transported to the treated water in the river channel.
2. Bubble atomizer
The high-pressure dissolved air water in the pressure tank is released by applying pressure, atomized into fine bubbles with a diameter of less than 20 μm, and the high-pressure saturated air-dissolved water also becomes low-pressure high-quality dissolved air water.
3. Atomizer inspection valve
The manufacturer of the micro-bubble generator tells you that when the nebulizer is clogged and other faults occur, the nebulizer can be repaired by shutting down and changing the valve.
4. Pressure tank
Made of stainless steel, the air-water mixture becomes supersaturated high-pressure dissolved air water under the joint action of the pressure in the tank and the rotating water flow.
5. Integrated two-phase flow gas dissolving machine
A structure is used to suck air and water at the same time, and after being crushed by the impeller to form a gas-liquid mixed liquid, it is transported to the pressure tank. The power is a designed submersible motor, the motor is coaxial with the pump head, the motor is installed in the pressure tank, the pump head and the motor are sealed separately, even if the seal of the pump head part is damaged, the liquid will flow directly outside without entering the motor cavity internal damage to the motor.
6. Water inlet regulating valve
Considering that the installation height of the equipment is different, the pressure in the pressure tank, the amount of dissolved air and water produced by the aerator, and the air-water ratio will all change. To achieve the effect (only need to debug it at the first startup).
7. Inlet pipe connector
The manufacturer of the micro-bubble generator tells you to connect the inlet pipe joint with a hose (with a certain degree of rigidity, which can withstand 0.05Mpa negative pressure) or a hard pipe, so as to transport the water in the river channel to the two-phase flow air dissolver.
8. Air intake control valve
Adjust the size of the air intake. It is adjusted jointly with the intake control valve to achieve the air-water ratio.
9. Return water pipeline
Connect the two-phase flow dissolver and the pressure tank.
10. Air release safety valve
The manufacturer of the micro-bubble generator tells you that when the pressure in the tank is too high, the safety valve will automatically open to release the pressure. valve to release the air in the pressure tank.
11 pressure gauge
The micro-bubble generator manufacturer tells you that it is used to observe the pressure value in the pressure tank in order to adjust the pressure in the tank.

Keyword:

Scan the QR code to read on your phone

Tesk

Contact

Zhejiang Nanyuan Pump Industry Co. Ltd.
Add:  No.8, Xuri Road,  Leidian town, Deqing District,  Huzhou City, Zhejiang,  China
E-mail:
service@teskpump.com
Tel:  +86-572-8298828  
Web:
www.teskpump.com  

COPYRIGHT Zhejiang Nanyuan Pump Industry Co. Ltd.      浙ICP备2020030285号-1