The micro-bubble generator is composed of a motor, a coupling, an air intake pipe, an aeration body, and a diffuser impeller.

The micro-bubble generator mixes the gas and water through the host pump and then enters it into the dissolved gas tank, so that the gas is dissolved in the water, and then the dissolved gas is released through the gas release device to form bubbles, which are jetted into the water at a high speed. Ionization, while breaking the colloidal connection of pollutants, breaking the chemical bonds and electrical adsorption of pollutants and water, at the same time, the injected active oxygen, oxygen ions, hydrogen ions and hydroxide ions generated by ionization and other oxidative decomposition pollutants, To achieve water purification.
The manufacturer of the micro-bubble generator tells you that the dissolution rate of micro-bubble in water exceeds 85%, the dissolved oxygen concentration can reach above the saturation concentration, and the micro-bubble remains in the water for a long time in the form of bubbles, which can be continuously consumed with the consumption of dissolved oxygen. Supplementing active oxygen to the water provides sufficient active oxygen and strong oxidizing ion groups for the microorganisms that purify and treat sewage, and ensures sufficient reaction time for active oxygen. The clean water reduced by the micro-bubble generator has a standard dissolved oxygen content of 4ppm, and the purification capacity of the water itself is much higher than the self-purification capacity under natural conditions.