The manufacturer of Submersible borehole pump for 10 inch tells you that the submersible borehole pump needs to be in constant contact with water, so it must do a good job of rust prevention, otherwise, once the equipment rusts, it will seriously affect its own work efficiency. It will also reduce the service life of the equipment. The manufacturer of Submersible borehole pump for 10 inch tells you to check the mechanical seal of the submersible borehole pump frequently, and check all kinds of seals, such as sealing rings, refueling screws, sealing boxes, etc.

 For worn parts and parts with poor sealing performance, they should be repaired or replaced in time. If they are found to be loose, they should be tightened in time. If the seal is not strong, new parts should be replaced in time. To prevent the rust of the pump, if the surface of the pump is damaged and peeled off, the rust should be removed in time, and anti-rust paint should be applied to protect it. The manufacturer of Submersible borehole pump for 10 inch tells you to regularly check the bearing of the submersible borehole pump to see if the bearing is worn, whether it is lack of oil, whether there is a running ring or outer ring, and whether it needs to be replaced.
The water pump generally needs to be inspected and maintained every two years. The sound from the mechanical operation can be used to preliminarily check whether the various parts of the water pump are normal. Therefore, in order to avoid the problem of rust in the submersible drilling pump, it is necessary to do regular cleaning and maintenance of the equipment, especially for some parts that are particularly prone to rust, which requires special attention. Once there are signs of rust, they should be dealt with in time. Or replace it to avoid affecting the normal use of the device.
When the submersible drilling pump is in use, it is prone to wear and tear to different degrees. This situation will cause certain damage to the equipment itself and affect the use. Therefore, it must be dealt with in time when encountering such a situation. Submersible borehole pump for 10 inch manufacturers tell you that the service life of the submersible borehole pump is largely related to the appropriateness of the selected material.​​
In the process of material selection, the geometric shape and particle size of the solid particles in the slurry should be fully considered. Metal materials can reduce costs while ensuring better wear resistance.
The above is what the manufacturer of Submersible borehole pump for 10 inch told you about how to prevent the rust of submersible borehole pump, I hope it will help you!