Stainless steel End suction Centrifugal pump manufacturers tell you that centrifugal pump is a kind of vane pump, relying on the rotating impeller in the rotating process, due to the interaction between the vane and the liquid, the vane transfers the mechanical energy to the liquid, so that the pressure energy of the liquid can be increased to achieve the delivery. For the purpose of the liquid, the action of the rotating impeller on the liquid transfers the mechanical energy of the prime mover to the liquid. What are the energy saving and consumption reduction measures for centrifugal pumps?

1. Improve the efficiency of centrifugal pump
The first step is to compare the selection schemes of various suppliers during the selection, and try to choose the most efficient scheme under the premise of considering the cost performance;
The second step is to send certain professionals to the factory to supervise the production. Supervise the manufacturing quality of the impeller, especially the quality of the impeller's airfoil, water outlet angle, blade indexing, flow channel shape, smoothness, etc., so that the delivered products are high-efficiency products under the current production conditions.
The third step, the manufacturer of Stainless steel End suction Centrifugal pump tells you that in the process of installation and commissioning at the production site, it is necessary to ensure that the foundation of the pump is firm, the centering of the pump is good, the front and rear valves are flexible, the design of the pipeline is reasonable, and the on-site control is safe and feasible. , The operation monitoring instruments are complete and accurate to ensure that the pump operation process can be monitored in real time.
The fourth step is to pay attention to the inspection of the equipment during the long-term operation of the pump, and report the abnormal situation immediately.
Stainless steel End suction Centrifugal pump manufacturers tell you that in the normal minor repair and overhaul cycle, all wearing parts should be inspected and replaced to ensure the long-term efficient and safe operation of the pump.
2. Optimize existing pumps
Stainless steel End suction Centrifugal pump manufacturers tell you that by adjusting the impeller diameter and pump speed, the flow head and shaft power of the pump will be affected, but the efficiency curve will not be affected, so that the pump can work in the high-efficiency area. The above adjustment flow head is limited to a certain range. If the working conditions change too much, the original pump may need to be remodeled.