When choosing to buy a water pump, whether to choose an end suction surface pump or a mid-opening pump, this problem still needs to be introduced in detail through the editor, and let’s learn about it through the article.

First of all, from the way of naming its water pump, the split pump takes in water from both ends of the impeller, while the End suction surface pump takes in water from one end of the impeller, so this is one of their differences.
The double-suction type is mainly used in workplaces with large flow and low lift. When the flow rate of the pump is greater than or equal to 280m3/h, the caliber is more than 200m2. If a single-suction pump is used, the speed must be about 1450rpm to meet the minimum suction requirement. However, if the double-suction pump is used under the same conditions, not only the size and weight of the pump are greatly reduced, but the impeller speed can be increased correspondingly, the volumetric efficiency is increased, and the reliability of the equipment is further improved.
End suction surface pump, also known as single suction pump, end suction surface pump has a small flow rate. Under the same flow rate, the end suction surface pump has a smaller volume, but the axial force is larger, and the bearing burden is greater. The end suction surface pump has a relatively low cost, a reasonable price, and is widely used, but it is still not as good as a double suction pump in many practical aspects. If the inlet pressure is high, it can be solved by using double suction wheels. Because the axial force balance of the impeller of the single-suction pump cannot be solved well, it is a big problem.
This is the difference between End suction surface pump and End suction surface pump edited by the editor for you. I hope I can help you. In addition, if there are users in need, you can communicate with us in time through online customers, and we will contact you as soon as possible.