EMAIL US
CALL US
Maintenance work of Submersible borehole pump for 4 inch
- Categories:NEWS
- Author:
- Origin:
- Time of issue:2021-08-20 17:12
- Views:
(Summary description)What is the maintenance work of Submersible borehole pump for 4 inch? I believe that many friends are not very clear about this, so let the editor briefly introduce to you, let's have a brief understanding!
Maintenance work of Submersible borehole pump for 4 inch
(Summary description)What is the maintenance work of Submersible borehole pump for 4 inch? I believe that many friends are not very clear about this, so let the editor briefly introduce to you, let's have a brief understanding!
- Categories:NEWS
- Author:
- Origin:
- Time of issue:2021-08-20 17:12
- Views:
What is the maintenance work of Submersible borehole pump for 4 inch? I believe that many friends are not very clear about this, so let the editor briefly introduce to you, let's have a brief understanding!
1. After the Submersible borehole pump for 4 inch is closed, put all the remaining water into the pump and pipeline, and clean the external soil to avoid freezing the water and ice in the pump body and the water pipe, causing them to expand and crack.
2. The bottom valve, elbow and other cast iron parts of Submersible borehole pump for 4 inch should be brushed with steel wire, then coated with anti-rust paint, then painted, dried, and placed in the machine room or storage room for ventilation and dry storage.
3. After the belt is removed, wash and dry it with warm water, hang it in a dry place without direct sunlight, and don't store it in a place with oil, corrosion or smoke. In any case, do not dip in oil, do not apply rosin and sticky substances.
4. Check the ball bearings, such as inner wear, movement, ball wear or surface spots. The gasoline or kerosene available for cleaning the bearings does not need to be replaced, greased and refilled.
5. Check whether the pump impeller has cracks or holes, whether the impeller fixing nut is loose, if it is damaged, repair or replace it. If the impeller is excessively worn or damaged, it should generally be replaced with a new one. Local damage can be repaired by welding, and the impeller can be repaired with epoxy mortar. The repaired impeller is generally subjected to a static balance test. Check the gap at the wear ring of the impeller. If it exceeds the specified value, repair or replace it.
The above is the maintenance work of Submersible borehole pump for 4 inch introduced by the editor. I hope it can be helpful to you.
Scan the QR code to read on your phone
Contact
Zhejiang Nanyuan Pump Industry Co. Ltd.
Add: No.8, Xuri Road, Leidian town, Deqing District, Huzhou City, Zhejiang, China
E-mail:
service@teskpump.com
Tel:
+86-572-8298828
Web:
www.teskpump.com
COPYRIGHT Zhejiang Nanyuan Pump Industry Co. Ltd. 浙ICP备2020030285号-1